SPECIFICATIONS
| Type | ML414H |
|---|---|
| Nominal Voltage(V) | 3 |
| Charge Voltage*1 (V) (Standard Charge Voltage) |
2.8 to 3.1 |
| Nominal Capacity (Voltage Range V)(mAh) |
1.0 (3.1V ～2.0V) |
| Internal Impedance*2 (Ω) | 600 |
| Standard Discharge Current(mA) | 0.005 |
| Cycle Life *3 (Time)50% D.O.D(Depth of Discharge) |
300 (10% D.O.D*4) |
| Diameter(mm) | 4.8 |
| Height(mm) | 1.4 |
| Weight(g) | 0.07 |
*1 A constant voltage charge is recommended, but due to a limit in charge current, it is necessary to insert a resistor to regulate charge current. Please contact us for further details. If a constant current charge is required, please contact us for more information.
*2 Value measured using AC (Altering Current) method in the fully charged state
*3 Counts of charge and discharge repetition that maintains about 50% of the minimum guaranteed capacity.
*4 Depth of Discharge
CHARACTERISTICS
Click to enlarge.
 |
|
 |
 |
Reflow Soldering Conditions
Click to enlarge.
 |
 |